5
ENGLISH
EN
AUTO/COOL
Manual operation can be used temporarily in case you can not find the remote controller or its batteries are exhausted.
1
1
1
1
1
Open and lift the front panel up to an angle until it re
mains fixed with a clicking sound.
2
2
2
2
2
One press of the manual control button will lead to the
forced AUTO operation.
3
3
3
3
3
Close the panel firmly to its original position.
CAUTION
•
Once you push the manual button, the operation mode
is shifted in an order as: AUTO, COOL, OFF.
•
Push the button twice, the unit will operate in forced
COOL mode. This is used for testing purposes only.
•
Third press will stop the operation and turn off the air
conditioner operation.
•
To restore the remote controller operation, use the
remote controller directly.
CAUTION
1. If air conditioner is used outside of the above conditions, certain safety protection features may come into operation
and cause the unit to function abnormally.
2. Room relative humidity less than 80%. If the air conditioner operates in excess of this figure, the surface of the air
conditioner may attract condensation. Please sets the vertical air flow louver to its maximum angle (vertically to the
floor), and set HIGH fan mode.
3. Optimum performance will be achieved within these operating temperature.
OPERATING TEMPERATURE
MANUAL OPERATION
Manual control button
Panel
Mode
Cooling operation
Outdoor temperature
Heating operation
Drying operation
17°C ~ 32°C
0°C ~
45
°C
17°C ~ 27°C
-15°C ~ 34°C
10°C ~ 32°C
0°C ~
45
°C
Room temperature
Temperature
J190
2/03/2005, 4:55 AM
5
