REQUIRED TOOLS
1.
Screw driver
9.
Manifold Guage
2.
Hexagonal wrench
10.
Gas leak detector
3.
Torque wrench
11.
Vaccum pump
4.
Spanner
12.
Pipe clamp
5.
Reamer
13.
Pipe Cutter
6.
Hole core drill
14.
Flare Tool Set
7.
Tape measure
15.
Electrical Circuit tester
8.
Thermometer
SAFETY PRECAUTIONS
EXTENDED PARTS
1.
Refrigerant Pipe
Models
07-09
12-21
24-36
Liquid size
1/4 inch
1/4 inch
3/8 inch
Gas size
3/8 inch
1/2 inch
5/8 inch
2.
Pipe Insulation Material (Polyethylene foam 9 mm thick)
3.
Vinyl tape
4.
Putty
•
Please read this installation manual carefully before starting installation of the unit.
•
This air conditioning system contains refrigerant under pressure, rotating parts and electrical connection which
may be dangerous and can cause injury. Installation and maintenance of this air conditioning system should only
be carried out by trained and qualified personnel.
•
After unpacking, please check the unit carefully for possible damage.
•
Before undertaking any work on the unit, make sure that the power supply has been disconnected.
WARNING & CAUTIONS
INSTALLATION
Do not store or unpack the unit in a wet area or expose
Do not install in a place where flammable gas may
to rain or water.
leak.
EN
It may cause the unit to short circuit and may result electric
shocks or fire.
Do not conduct installation in wet area or in the rain.
It may cause fire.
This system is designed for domestic or residential
use only.
It is a high risk to cause the electrical shocks.
If used in certain environments, such as a menufacturing
workplace, the equipment may not function efficiently.
ENGLISH
3
J174_lastRev4.pmd
3
3/14/05, 3:27 PM