HFG02 Operation Manual
York EMC Services
Page 21 of 25 Doc. No. Y0321/DOC/024 Rev. 3
EUT Mode
Setting
Load Operation
Pst
Plt
Intermittent
flicker
8.33 Hz flicker (50 Hz Test Supply detected)
1.07/0.74 0.94
Table 4: Typical Pst and Plt results measured to EN/IEC 61000-3-3
6.4 Calibration
The HFG02 is supplied with a manufacturer’s calibration certificate.
It is recommended that the HFG02 should be periodically checked to ensure
damage or long-term changes have not altered the output. The periodicity of these
checks is typically determined by the quality assurance regime employed by the
user, however it is recommended that the HFG02 output be retested annually. This
service is available from York EMC Services and can be arranged through your
supplier.