![background image](http://html1.mh-extra.com/html/york/geysir-vario-range/geysir-vario-range_user-manual_3952504003.webp)
ENGLISH
3
EN
All equipments are tested at the manufacturer. Any warranty claims will cease if any modification is executed
on the equipment without prior consent of the manufacturer.
For any claim acceptance the following conditions shall be fulfilled:
• The first commissioning of the equipment must be done by a technician trained or authorized by the
manufacturer or by a professional partner.
• Only trained and professionally skilled staff shall carry out any maintenance work
• Original spare parts may be used only.
• All the maintenance works must by carried out in regular terms.
NON OBSERVANcE Of THESE cONDITIONS WILL cAUSE LOSS Of WARRANTY AND ITS TERMINATION IN cONSEQUENcE .
The unit can be easily switched off through a sepatate ON/OFF level on the integrated display.
System installation must be executed in line
with Machinery Safety Directive No.: (98/37/EC),
Low Voltage Directive (73/23/EEC), Directive on
Electromagnetic Compatibility (89/31/EEC), and it
should meet the common rules which are in force for
technical applications, and should comply with the
corresponding national regulations as well.
! WARNING
The equipment must be grounded. Any maintenance
or installation work carried out on the live equipment
parts, in any case, may not be carried out if the
equipment is connected to the electric power supply
utility.
! WARNING
Equipment is under pressure!
Any gas discharging is dangerous and may lead to
accidents.
! cAUTION
The user is responsible exclusively for equipment
operation and employment, and for necessary intime
maintenance execution ,in the given extent, and in
line with this manual, by means of professional staff.
! cAUTION
The equipment must be situated in dry area on
suitable, and horizontal footing.
Temperature in this area may not drop under zero
point, as we can prevent only in this way any water
circuit freezing.
! WARNING
The system is unable to absorb any mechanical load
applied by components installed externally. Such
additional load may cause incorrect operation or
damage to the equipment, or may cause accidents.
There is a loss of all warranty rights in such case, at
the same time.
! WARNING
The packaging must be disposed in line with the
law being in force. The manufacturer delivers the
equipment in recyclable wrappingmaterials and so it
minds environmental protection.
It is compulsory to follow the instructions presented
in this manual, because in case of any consequential
damage, occurred in consequence of unprofessional
manipulation, all the warranty terms granted will
cease. The contents of this manual, and of any
other document delivered with this equipment, is the
manufacturers proprietorship.
This material may not be reproduced, without
manufacturer‘s permission, neither in one nor in
exception forms. The manufacturer reserves all
rights for any change of the equipment specification
without prior notice about this fact.
WARRANTY
SWITcH Off
SAfETY
DIREcTIVES fOR THIS MANUAL