York EVJC 12, Installation Instructions Manual

Page: 196 / 204

268
Disassembly
Screws
Motor supporter
Screws
Four-way valve
Soldered spot
Bottom nuts
7.Disassemble the motor and motor supporter
Unscrew four pcs screws which fix the motor, then
can take down the motor. Unscrew the screws, which
fix the motor supporter, then take down the motor supporter.
8.Disassemble the four-way valve
Use the wet cloth wrap four-way valve, unsoldered
the four pcs soldered spot on the four-way valve,
then can take down the four-way valve.
The solderprocessing should be as quickly as possible,
and the cloth should keep wet, please do not to damage
the wires.
Note: Please discharge the refrigerant before maintenance.
8.Disassemble the compressor
Take down the soundproof cotton on the compressor,
show up the compressor, then loosen three pcs bottom
nut on the compressor, then unscrew the earth srew on
compressor, then take down the compressor and air
discharge pipe.