8.
9.
7.
Rest the computer console on the front handle bar
and connect the computer wire plug to the middle
wire socket protruding at the top of the left handle bar
post securely.
Secure the computer console to the handle bar post
mounting tubes by using, four allen head bolts and
star washers.
Attach the computer console fully onto the handle
bar post mounting tubes carefully as shown.
HANDLE BAR POST
MOUNTING TUBE
X4
#8563-93
#8563-09
NOW tighten all the bolts you have fitted.
NOW tighten all the bolts you have fitted.
RECHECK
Recheck that all of the bolts are tightened securely for your safety and comfort.
Plug the power cable into a suitable AC outlet (220~240 Volt 50Hz).
Before you use the treadmill for the first time turn on the power switch and connect the
magnetic safety key.
Allow the treadmill to run for 10 minutes or so without anyone using it.
Check that the mat is tightened properly and runs smoothly.
10.
Attach the handle bar post top covers onto the handle
bar properly as shown.
NOTE: TAKE CARE to ensure the wire does
not get trapped when you attach the
computer console.
If the console will not align and fit
easily, loosen all the bolts fitted so far -
and try again.
Push the extra length of wire down into the
handle bar post gently while attaching the console.
MIDDLE WIRE
SOCKET
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
*
*
PACER 480HRC TM / 05
Summary of Contents for YORK PACER 480 HRC
Page 7: ...DESCRIPTION PACER 480HRC TM 06 ...
Page 30: ...PLACE STAMP HERE ...