York Fitness XC530, Owner'S Manual, Page: 7 / 32

7
Step 1.
The rear stabilizer has end caps that can vary in height to •
enable you to level the trainer on uneven floors.
Fix the rear stabilizer to the main frame and secure by
•
using two carriage bolts, spring washers, washers and
nylon locknuts.
Fix the plastic caps onto the locknut heads.
•
NOTE: This equipment has been supplied with some Nylon
Locknuts. It is essential that the nuts are fully tightened onto
the bolts, so that the bolt penetrates through the nylon insert.
Step 2.
The front stabilizer has moving wheels near each end. •
Fix the front stabilizer to the main frame and secure by •
using two carriage bolts, washers, spring washers and
nylon locknuts.
MAKE SURE you fasten the nuts and bolts securely for
your safety and comfort when pedalling.
Fix the plastic caps onto the locknut heads.
•
Part No. 5677-09 x 2 Part No. 5677-11 x 2 Part No. 5677-10 x 2 Part No. 5677-29 x 2 Part No. 5677-12 x 2
Part No. 5677-09 x 2 Part No. 5677-11 x 2 Part No. 5677-10 x 2 Part No. 5677-29 x 2 Part No. 5677-12 x 2