background image

your warranty

This product is supplied with a standard warranty as follows:
•  Lifetime frame
•  12 month other parts
•  12 months labour

This product is warranted for use in a home, personal, family or household environment

Please Note: Warranty details may vary from one market area to another

Warranty Terms

York Barbell Ltd. warrants that the Product you have purchased from an authorised York reseller is free from defects in materials and 
workmanship.  The Warranty is valid subject to normal and reasonable use in the environment as described above, and correct assembly of 
the product during the warranty period.  The warranty period extends to the original purchaser only.  It is not transferable to anyone who 
subsequently purchases the Product from you.

The warranty excludes normal wear and tear on parts.

Your sales receipt, showing the date of purchase of the product, is your proof of the date of purchase.

This warranty becomes valid only if the Product is assembled / installed according to the instructions / directions included with the product.  
This warranty does not extend to any product that has been damaged or rendered defective: (a) as a result of accident, misuse, abuse or lack 
of reasonable care; (b) by the use of parts not manufactured by York Barbell or sold by York Barbell; (c) by modification of the product; (d) as a 
result of service by anyone else other than York Barbell or an authorised York Barbell warranty service provider.

During the warranty period York Barbell will at no additional charge provide replacement part(s) or repair the product (at York Barbell’s option) 
if it becomes defective, malfunctions or otherwise fails to conform with this warranty under normal, non-commercial, personal, family or 
household use.  In repairing the product, York Barbell may replace defective parts or at the option of York Barbell, use serviceable used parts 
that are equivalent to new parts in performance.  All exchanged parts and products replaced under this warranty will become the property of 
York Barbell.  York Barbell reserves the right to change manufacturers of any part to cover any existing warranty. 

If the product must be returned, you must return the Product or defective part to York Barbell in its original container (or equivalent) with 
Proof of Purchase.  Any evidence of alteration, erasing or forgery of proof of purchase documents will be cause to void this warranty.  You 
must prepay any shipping charges and you are responsible for insuring any product or part that is returned.  Should any product submitted 
for warranty service be found to be ineligible, an estimate of repair cost will be furnished and the repair will be made if requested, upon 
York Barbell’s receipt of payment or acceptable arrangement of payment.  Under no circumstances will returns be accepted without return 
authorisation by our Customer Service department.

To obtain warranty service you must provide the following information: 

Name of Product, Product Code, Batch No, Date Purchased, and Nature of fault or part number required.

Neither dealer of this product nor any retail establishment selling this product has any authority to make any warranties or to promise 
remedies in addition to, or inconsistent with, those stated above. This warranty does not affect your statutory rights.

Please note that warranty terms may vary from one market area to another

15

Summary of Contents for Heritage c102



















Reviews: