![background image](http://html1.mh-extra.com/html/york-fitness/53061/53061_owners-manual_3503040012.webp)
www.yorkfitness.com
12
Hand Pulse Sensors
This exercise cycle is fitted with 2 hand pulse
sensors. To obtain a pulse reading you must
have both your left and right hands on the
sensors at the same time. Do not grip the hand
sensors too tight and allow the computer a few
seconds to display the reading.
Adjusting The Resistance
This exercise cycle features a speed
independent braking (resistance) system. The
resistance is controlled by a magnet, which is
moved closer or further away from the flywheel
- the closer the magnet is to the flywheel the
higher the resistance.
Leveling Your Exercise Cycle
To help you level the exercise cycle on uneven
surface, 2 height adjusters are included on the
rear stabilizers. Simply twist these around to
adjust the height of the cycle.
Adjust the seat
1. Unscrew the hand wheel.
2. Adjust the seat up / down or forward /
backward to your requirements.
3. Re-screw the hand wheel - make sure it is
screwed tightly.
4. The basic rule for getting the seat height
right is that as the pedal reaches its lowest
point, the leg is almost straight.
Note: Do not pull the seat out too far - the
maximum is indicated with a piece of tape on
the seat post.
Operational instructions
A
C
T
I
V
E
1
1
0
RPM
SPEED
RESET
RECOVER
Y
SET
MODE
TIME
DIST
ANCE
PULSE
Hand Pulse Sensor
A
C
T
I
V
E
1
1
0
RPM
SPEED
RESET
RECOVER
Y
SET
MODE
TIME
DIST
ANCE
PULSE
Resistance Level
A
C
T
I
V
E
1
1
0
RPM
SPEED
RESET
RECOVER
Y
SET
MODE
TIME
DIST
ANCE
PULSE
A
C
T
I
V
E
1
1
0
RPM
SPEED
RESET
RECOVER
Y
SET
MODE
TIME
DIST
ANCE
PULSE