background image

14

oPeratIon InStrUCtIonS

storage

fold-up: 

Simply pull the knob with your right hand 

and lift the running deck to fold (with your left hand). 
Make sure you hear the sound of the deck locking into 
position - this ensures the deck is locked in place and 
will not fall back down.

fold-down:

 Whilst taking the weight of the deck with 

your left hand, pull the knob with your right hand. Still 
holding onto the deck, guide it slowly down to the floor. 
Make sure there is nothing obstructing the deck as you 
lower it.

moving the treaDmill

This treadmill features 2 non-marking wheels to help 
manoeuvrability:

Fold-up the deck as explained above.

1. 

Stand in front of the treadmill, square on.

2. 

Put one hand on each of the handrails and tilt the 

3. 

treadmill towards you.

Use the handrails to push the treadmill to the 

4. 

desired location.

note: Before moving the treadmill, ensure the 
power cable is unplugged from the wall and the 
treadmill.

aDjusting the incline

Use your left hand to hold the rear of the treadmill 

1. 

up.

Use your right hand to pull the knob to adjust the 

2. 

rear stabilizer assembly to the desired height you 
wish then release the knob.

Lower down the main frame to the floor gently 

3. 

before using the treadmill.

Wheels

Adjusting 

knob

Summary of Contents for 51094-G03

























Reviews: