York Fitness 51094-G03, Owner'S Manual

Page: 9 / 24

9
aSSemBLy InStrUCtIonS
steP 3
Ask someone to help you hold the console assembly in front of both handlebar posts closely. 1.
Connect the computer wire plugs to the hand pulse sensor wire sockets protruding at the top of the handlebar 2.
post.
NOTE: Ensure the wires are connected as tightly as possible; Slide the rest of the connect wires into the computer
console post before the handlebar post attachment.
Attach the computer console onto the handlebar post mounting brackets and secure, using 4 x bolts (80) and 4 x 3.
star washers (103). If the console will not align and fit easily, loosen the bolts fitted so far then try again.
NOTE: Ensure the wires do not get trapped when you attached the computer console assembly. Ensure the wires
do not get trapped when you secure the bolts to the handlebar posts.
Connect the computer wire plug to the middle wire socket protruding at the front end of the right handlebar post. 4.
NOTE: Ensure the wires are connected as tightly as possible.
Feed the excess wires and connectors into the right handlebar post and cover by cable insert (74). 5.
Part 80 x 4
42MM ALLEN HEAD BOLT
Part 103 x 4
STAR WASHER
Part 74 x 1
CABLE INSERT