SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
*
*
1.
ASSEMBLY INSTRUCTION
ATTACH THE REAR STABILIZER
Front stabilizer has moving wheels near each end.
Rear stabilizer has end caps that can vary in
height to enable you to level the trainer on
uneven floors.
X4
A
A
NOTE: MAKE SURE you fasten the nuts and bolts
securely for your safety and comfort when
pedalling.
NOTE: MAKE SURE
GENERAL
REMOVE ALL THE PARTS OF YOUR ELLIPTICAL CROSSTRAINER 3600
FORM THE CARTON AND PLACE THEM ON THE FLOOR CAREFULLY.
FOLLOW THESE INSTRUCTIONS CAREFULLY AND IT WILL MAKE IT
EASIER FOR YOU TO ASSEMBLE YOUR ELLIPTICAL
TRAINER 3600.
CROSS
ATTACH THE FRONT STABILIZER
REAR
STABILIZER
END CAP
RIGHT
PEDAL POST
POLYFOAM
BLOCK
2.
# 8507-09
# 8507-10
# 8507-11
# 8507-96
Fix the rear stabilizer to the main frame and
secure, using two carriage bolts, spring washers,
washers and nylon locknuts.
Fix the plastic caps onto the locknut heads.
NOTE: This equpment has been supplied
with some Nylon
Locknuts.
It is essential that the nuts are
fully tightened onto the bolts,
so that the bolt penetrates
through the nylon insert.
NOTE:
# 8507-97
Fix the front stabilizer to the main frame and
secure, using two carriage bolts, washers,
spring washers and nylon locknuts.
Find a polyfoam block from carton and rest
the right pedal post assembly on it as shown.
MOVING
WHEEL
X4
Fix the plastic caps onto the locknut heads.
fitnessfaq.info
Summary of Contents for 3600 Elliptical
Page 10: ...DESCRIPTION...
Page 11: ...DESCRIPTION...