YoraHome MANDRILL 3036, User Manual

Page: 64 / 68

Optional Laser Installation
Part 6
To utilize the laser engraving functionality of the
Mandrill, the
Yora Laser Module will need to be installed
in the Spindle Mount, as described in Part 2.
The user will also need to change the controller
configuration, in particular the $32 setting will need to
be set to a “1” to enable proper laser operation.
Please note that the default $30 value of the controller
is 10000 - this means that the S-MAX value for laser
engraving will need to be set to 10000 to equal 100%
power to the laser module.
The laser module cable connects to the rear of the
Controller, and the Laser/Spindle Selector Switch will
also need to be set to “Laser”.
Laser Engraving with your Mandrill