1. Receiver can be controlled by up to 10 transmitters.
2. Longer than 6 seconds pause between series of button clicks during programming will cause device to switch off from
programming mode without saving any changes.
12. Removing limit positions
13. Programming another transmitter
METHOD 1:
METHOD 2:
METHOD 3:
Adding a transmitter by this method is possible after programming the limit positions.
Motor will make a sound.
Roller shutters will make short
up/down movements.
Press programming button P2
on the A remote control.
Remote control
has been programmed.
Motor will
make a sound.
Roller shutters
will make short
up/down movements.
Motor will
make a sound.
Roller shutters
will make short
up/down movements.
Roller shutters
will make 2 short
up/down movements.
Motor will make a several
short sounds.
Motor will make a sound.
Roller shutters will make short
up/down movements.
Roller shutters will make
2 short up/down movements.
Motor will make a several
short sounds.
Press
DOWN button.
Press
programming
button P2.
Press programming button P2
on the A remote control.
Press programming
button P2 on the
B remote control.
Press
programming
button P2.
6
Press programming button P2
on the A remote control.
Remote control
has been programmed.
Motor will
make a sound.
Roller shutters
will make short
up/down movements.
Motor will
make a sound.
Roller shutters
will make short
up/down movements.
Roller shutters
will make 2 short
up/down movements.
Motor will make a several
short sounds.
Press programming button P2
on the A remote control.
Press STOP button
on the B remote
control for 2 seconds.
Motor will make a sound.
Roller shutters will make short
up/down movements.
Press and hold programming
button for 2 seconds
on motor head.
Roller shutters will
make 2 short
up/down movements.
Motor will make a several
short sounds.
Press and hold
STOP button on the
B remote control for
2 seconds.
14. Deleting another transmitter
Motor will make a sound.
Roller shutters will make short
up/down movements.
Motor will
make a sound.
Roller shutters will
make short
up/down movements.
Roller shutters will
make 2 short
up/down movements.
Motor will make a several
short sounds.
Press programming
button P2 on the
A remote control.
Press programming
button P2 on the
B remote control.
Press programming
button P2 on the
A remote control.
Remote control
has been removed.
