________________________________________________ USER’S MANUAL PULSEE COMPACT V1400 13
EN
fAU LT S A N D R E PA I R
In case of abnormality with this product, please treat it in the way as stated hereinafter ; if the
cleaner still refuses to work normally, please contact the stop from where this product was bought
or with the appointed service point
Fault
Treatment
The cleaner cannot operate. Check whether the power plug is inserted securely ; pull out the
plug and then reinsert it in the power socket.
Check whether the power socket is electrified.
Check whether the switch of the cleaner is in “ON” position.
The suction force is re-
duced.
Check whether the floor brush, the hose and the spile are jammed,
and remove any blockage immediately.
Check whether the air-inlet filter gauze is dusty; frequently clean
rubbish or replace air-inlet and air-outlet HEPA.
There is abnormal sound
when the motor is under
operation.
Stop the cleaner immediately.
Check whether the floor brush, the hose and the spile are jammed,
and remove any blockage immediately.
A f T E R - S A L E S E RV I C E
When abnormalities or problems are found with the product in use, please contact the appointed
service point for consultation or repair.
T E C H N I CA L PA R A M E T E R S
Model
Dust
collection
capacity
Rated
voltage
Rated
frequen-
cy
Rated
input
power
Maximum
vacuum
degree
Noise
PULSEE
Compact
V1400
1L
220-240V
50Hz
1200W
≥
30kPa
≤
66dB
