________________________________________________ USER’S MANUAL PULSEE COMPACT V1400 9
EN
O P E R AT I O N I N S T RU C T I O N S __________________
H OW TO S TA RT
1. first of all, pull out the power cord from the cord reel to the needed length; insert the power
cord plug into the power socket, and press down the power switch button with finger or step on
it with foot; then you can control the start and stop of the cleaner.
2. The yellow mark on the power cord indicates its desired length. Never pull out the power cord
to the length exceeding the red mark.
C O N T RO L O f S U C T I O N f O R C E
When the suction inlet is jammed by some cloth due to the over-large suction force, you can adjust
the air escape pushbutton on the hose handle to control the suction force at the suction inlet, as
is shown.
Air escape push button
P ROT E C T I V E D E V I C E S O f M OTO R
1. There is a temperature controller designed in the body of cleaner motor, which can automati-
cally cut off the power supply of motor to prevent overheating. When the air-inlet or air-outlet
pipe is overloaded or blocked, the temperature of motor rises, then the temperature controller
cuts off the power supply of motor automatically to make the motor cool, preventing the cleaner
from being damaged.
2. If the temperature controller is cut off, stop the cleaner immediately and pull out the power plug
to make the cleaner cool, and check and remove the hair roll or other roll-like rubbish blocking
the air inlet (including the hose and the spile), and replace the filter HEPA or filter gauze when
necessary.
3. After cooling the motor for 30mins, plug in the power plug and check whether the temperature
controller has been reset. If the power supply of the cleaner hasn’t been cut off, the temperature
controller of the motor won’t be reset even when the motor has become cool.
