12 USER’S MANUAL PULSEE COMPACT V1400 ________________________________________________
Caution
It is normal that the white central filter in the dust barrel may change color, which
cannot affect its filtration performance. If the hose and the central filter are difficult
to clean, we recommend that you use water to flush them; however, please be sure
to place them in the dry air for at least 24 hours after they are flushed by water.
Key Points
Please note : when the dust collecting barrel or the filter cover is not installed in
place, the operation status will be invalid, and the cleaner will have no dust absorp-
tion capacity. At this time, you need to check carefully whether the dust collecting
barrel and the filter cover have been installed in place.
Caution : please keep the suction passage unobstructed, otherwise the motor may
become overheating or even be damaged.
R E P L AC E M E N T O f R E A R f I LT E R f O R M OTO R
The rear filter for motor is installed behind the air outlet grid, which can be washed due to the
materials used. When the surface is jammed seriously by dust, the filter should be replaced by a new
one or washed by water to maintain enough suction force. (figure 11/12)
It is usually necessary to clean and replace the filters for motor only after they have been used for
6 months to 12 months. Please remember to confirm that all filters have been correctly installed into
the machine before turning on the cleaner to use.
Key Points
The power supply of the cleaner must be cut off before replacing any filter!
