Yoo Digital Home I.WIP 2000, User Manual

Page: 38 / 112

38 USER’S MANUAL I.WIP 2000 ____________________________________________________________________________________________________________________ USER’S MANUAL I.WIP 2000 39
Indicator (the pointy part is the front.)
transmission signal (up to 5m)
Robot cleaner
01. Press the [Mode] button to set the [Set cleaning areas] mode.
When the lamp gets turned on, repeat the pressing until the [Set cleaning areas] lamp is turned •
on.
02. Press the [Distance] button and adjust the distance of signals to set cleaning areas.
Repeat the pressing until the distance of signals to set cleaning areas becomes a desired •
level.
1m(•) - 3m(••) - 5m(•••)
•
If the distance is set as too short or too long, the robot cleaner may decide the area wrongly. •
03. Calculate the signal distance to arrange the indicator in an appropriate position.
If the signal does not reach the wall, the robot cleaner may slip through the crack. •
If the emitting signals of each indicator get overlapped, no setup for cleaning area
will be made.
In this case, it will become as if no indicator were installed.
Important
U S I N g t h Ro U g h S E t U P o f C L E A N I N g A R E A S
___