10
11
Basic Functions
Press and hold the button for 2 seconds to turn it on
Short press the button to start a single measurement
Short press the button to enter the front and rear reference
setting mode.
1. Set the machine front
end as the starting
reference.
2. Set the machine
backend as the starting
reference.
Press and hold the button for 2 seconds to start continuous measurement
Just press the button, you can switch distance, area, volume and Pythagorean
measurements.
In the Off State
Single Measurement
Benchmark Setting
Continuous Measurement
Multi-function Measurement
m
m
2
m
m
3
m
m
Notice:
In the future reference measurement, the measured data displayed includes 8 cm of the
body size.
Correction Function Setting
Press and hold the button for 2 seconds to switch to another unit of measure.
Press and hold 2 seconds to turn off.
Short press the button to clear the data.
Unit Switching
Shutdown
Clear Data
m
m
in
ft
Step 1
Step 2
Step 3
When the product is in the off state, if you press and hold the button for 5 seconds,
the calibration mode can be performed and the screen displays (boot) at this moment.
Precision adjustment setting:
In calibration mode, again press and hold the button for 2 seconds to enter the
precision adjustment setting. The screen will display the present precision setting (such
as CAL.0). The precision for the machine can be adjusted from -7 till +7 mm, and you
just short press the button to get it.
Mute button setting: in the previous mode press and hold the for 2 seconds, to
enter the button mute setting mode. Then turn on/off the button sound by short
pressing the button.
the sound is on
the sound is off
