Yongnuo YN 622N II, User Manual

Page: 16 / 48

13
Ÿ
When half press the shutter button of the camera , the hot -
shoe flash will be awaken .
Ÿ
In standby state , pressing the [ TEST /-] button of the
transceiver will awake the flash . When loosening the button , the
flash of the group having been selected will fire a test flash.
Ÿ
Refer to the following figure, the transmitter sets A+B two
groups of flash , hold down the [Test/-] button, the flash on A and
B of the receiver will be awakened, and when loosening [TEST/-]
button will fire a test flash.
※ If the flash can not be awakened, manually awaken the
flash before shooting.
※ Using PC por t to connect with flash without the
awakening function.
※
All the indicators going out when flash fires(Receiver).
5. The single contact camera / flash : Manually setting the
flash output
1) . Transmitting group setting: According to the transmitter
group setting method 2 ( P9 ).
2) . Flash mode setting ( on the flash ): Set to manual flash mode,
use the transmitter's main flash trigger contact; but it does
n o t s u p p o r t h i g h s y n c h ro n o u s s p e e d o r o t h e r T T L
function ( the maximum synchronous speed is 1 / 250s or less).
Flash Awaking and Testing Flash