Yongnuo YN 622N II, User Manual

Page: 9 / 48

1. Installing the Batteries
※ Remove the batteries when the product is
not used for long time.
※ Please replace the both two batteries at
the same time.
Open the cover and install two AA
batteries (excluded)according to the
+ a n d - m a r k s , re c h a rg e a b l e
batteries of 1.2V can be used. When
in low battery, the status indicator
light will blink(red) separately, at
the moment need to replace battery.
Preparation Before Use
6
※ It is supported that install a flash on the hot shoe of
the transmitter(on-top flash).
1).Attach the transmitter.
Slip the transmitter ' s mounting foot
all the way into the camera ' s hot shoe.
2). Secure the transmitter.
On the mounting foot, slide the lock
lever to the right. When the lock lever
clicks in place, it will be locked.
3).Detach the transmitter.
While pressing the lock-release
button, slide the lock lever to the left
and detach the transmitter.
2.Attaching and Detaching the Transmitter