Yongnuo YN 622N II, User Manual

Page: 15 / 48

Setting
Enable/disable (stand by)
7.Flash Shutter Sync :
Ÿ
R efer to the camera’s setting. Supports front- curtain
sync, rear- cur tain sync and high speed synchronous
( HSS / Auto FP* ).
* Using high-speed synchronization need to set the flash
sync speed of the camera to AUTO FP.
*The maximum high-speed synchronization speed is
1/8000s or 1/4000s (depends on the camera).
*
Some models of camera does not support the HSS
(with out Auto FP option), the shutter speed will be
limited to 1/250s or less when using this kind of camera.
※ It need to us ing single AF of the camera .
※ Both the receiver and the off-camera flash on the
receiver will not be emitted.
8.AF Assist Beam Emitter
Ÿ
When using AF under low-light, the
built-in AF-assist beam emitter of the
transmitter will be emitted automatically
to make it easier to autofocus, and the
on-top flash which support AF assist
beam emitter function can also be
emitted at the same time.
12
State
Operate
Press [ ]button
less than 3 seconds
Channel
indicator
AF assist
beam emitter
On
Off
Blinking
three times
Enable
Disable
Enable/Disable
Press [ ]button
more than 3 seconds