SETTING UP AWNING & ADJUSTING
2
3
4
5
With partner hold the top and bottom of the middle of the eaves where it makes a diamond shape as pictured in (
Fig. 2A
)
lifting slightly off the ground walking backward to extend the frame.
Be careful not to pinch your fingers as the frame opens!
Open airflow vents to the desired level by pulling up on the vent arms.
At the top of the leg, place one hand on the top corner pushing down and with the other hand just below the latch slider lifting up
until it locks into position as pictured in
(Fig. 4A)
.
With partner standing on the same side, lift up outer leg to slide out inner leg until the chrome push button locks into place at desired height.
(
Fig. 5A).
Repeat on opposite legs.
PLEASE NOTE:
In order for the awning to work properly the canopy needs to be extended to its highest level.
1
2
Extend steel shock cord pole and insert the pole through the sleeve of the awning as pictured in
(Fig. 1A)
.
Attach the steel pole to the awning arm with small extension as pictured in
(Fig. 2A).
The awning has three different height levels.
Adjust the height by pulling the awning arm and extending to desired height.
PLEASE NOTE:
When adjusting the height of the awning make sure both awning arms are at the same level.
3
To lower or raise awning when it’s in a locked position, pull the ring pin to unlock as shown below
(Fig.3A)
Securing Your Canopy:
To harness your canopy to the ground, insert metal stakes into each foot corner. For additional stability,
you can purchase from our Customer Support Center anchor weight bags designed to secure quickly to each leg for additional
downforce to secure your canopy on any surface.
1A
Fig.
4A
Fig.
5A
Fig.
2A
Fig.
1A
Fig.
2A
Fig.
3A
Fig.
SETUP
1
Place the canopy in the desired location for shade. With partner standing on the opposite side of the canopy,
hold the outer legs and lift slightly off the ground stepping backwards (
Fig. 1A
).
