page
24 of
Fig.5 Fig.6
4) At this time, please follow the interface prompt of Fig.6, press the “
”button on your
thermometer to start up and measure temperature until the temperature value is displayed
on the thermometer, then app can successfully search your thermometer. When the app
searches for your thermometer, the APP will display as Fig.7.
5) Click the “Waiting for binding” on Fig.7 interface, it will jump to Fig.8 interface
6) Click “PAIR”, the APP will send out a command to your thermometer, at the same time, the
APP will jump to Fig.10 interface, the LCD of your thermometer will display pairing code
（
a
pairing code include Six digits, see Fig.9
）
after your thermometer receiving the command.
Note:
The six digit pairing code will be displayed by thermometer’s LCD for twice. First, the first
three pairing codes will be displayed for 2.5S, and then the last three pairing codes will be
displayed for 2.5S. In this way, it will be switched in turn until the binding is successful or the
thermometer is automatically turned off. (under the status of displaying the pairing codes,
the thermometer will automatically shut down if there is no operation of 120s ±10s.)
“
□
Allow access to your contacts and call history” in Fig. 8 and Fig.10 , the
“
□
PIN contains
letters or symbols” and “you may also need to enter this PIN on the other device” in Fig.10,
All of these are automatically ejected by the Bluetooth system of mobile phone. Different
