page
12 of
Software version
Embedded software version of TH10A:V1.0.0
Bluetooth APP version: 1.0.1
Note: Not intended to be sterilized.
Not for use in an OXYGEN RICH ENVIRONMENT
Remark: 12Y-down mode is designed to measure the body temperature of people aged 12 and below, 12Y-up
mode is designed to measure the body temperature of people over 12 years old.
Note:
If you need to monitor a patient's temperature over a period of time, due to the same person's temperature can
vary at different times of the day, so it is recommended to monitor the human temperature for 3 times a day
(Measure once in the morning, noon and evening respectively), and take 3 measurements for each time and take
the average for reference.
Statement: ASTM laboratory accuracy requirements in the display range of 37 to 39
℃
(98 to 102
℉
) for IR
thermometer is
±
0.2
℃
(
±
0.4
℉
), whereas for mercury-in-glass and electronic thermometers, the requirement per
ASTM Standards E667-86 and E112-86 is
±
0.1
℃
(
±
0.2
℉
).
Differences in the accuracy of measurements obtained with IR thermometer versus contact thermometers (that is,
mercury-in-glass and electronic thermometers) are also related to operators’ technique, anatomical variations,
earwax buildups, subject cooperation. Please make sure to operate in accordance with this user manual to obtain
the accurate reading.
This infrared thermometer meets requirements established in ASTM Standard (E1965-98). Full responsibility for the
conformance of this product to the standard is assumed by Shenzhen Yolanda Technology Co., Ltd.(Address:
Room 201,Jinfulai Building, No.49-1, DabaoRoad,Dalang Area,Xinan Street,Baoan, Shenzhen, China).
7 wireless technology
7.1 Summary
The device have wireless transmission function through Bluetooth:
Through using smart phone to download and install Bluetooth APP, and binding the APP and
your thermometer, you can transfer the measurement data of the thermometer to APP for
storage through data upload operation, you also can check your measurement result history on
the APP.
Bluetooth is a wireless communications system that is designed to operate in short-range
wireless personal area networks.
The product supports the Smart (low energy) Bluetooth protocol. It operates in the spectrum
range 2.402 GHz to 2.480 GHz industrial, scientific and medical (ISM) band. Smart Bluetooth
uses 40 x 2 MHz channels. Within a channel, data is transmitted using GFSK shift modulation.
The bit rate is 1 Mbit/s and the maximum transmit power is 5 mW. The Smart Bluetooth protocol
uses frequency hopping to counteract narrowband and interference problems.
The specification of wireless transmission
For Bluetooth
