page
18 of
3) Aim measuring head with the forehead cap towards the middle part of forehead, make
sure that the distance between probe tip and forehead is 1~3cm. Press the “
” button
for about 1 seconds then release the button, about 1 second later, the measured value
will appears on the display with a “bi---” sound
(If the buzzer sound is turned on)
.
4) Take off the device for reading the result.
The measurement result remains on LCD for 3 seconds after finishing measurement, then
the “
”signal will be displayed on the LCD , you can make further measurement now.
If you need to make another measurement, repeat the steps above.
Important note!
Check if there is no icon on LCD, if a icon is on LCD, this means that you have not
successfully entered the forehead mode. Please withdraw the measured value and re-
cover the forehead cap to enter the forehead mode. Make sure that the LCD does not
have the icon, then measure the forehead temperature again.
The thermometer designed with 12Y-down mode and 12Y-up mode, 12Y-down mode is
used to measure the body temperature of people aged 12 and below, 12Y-up mode is
used to measure the body temperature of people over 12 years old. LCD display
means the current mode is 12Y-down mode,
LCD display
icon means the current
mode is 12Y-up mode. According to the age of the subjects, if your first measurement
use the wrong mode, please withdraw the value, and
press the
“
”
button to select
the correct mode, then perform a new measurement.
Warnings
