Page
17
/
35
2) Press memory button “
” again, the LCD display average measurement data as below:
3) Press memory button “
” again, the LCD display the latest measurement data as below:
4) Every time you press the memory button
briefly, you can look through the next set of measurement data
in the order of measuring time from near to far, and you can view Max.99 sets of records of current user.
5) While viewing the historical data of user 1 or user 2, press another user button to switch to display the
measurement data of another user.
※
In the state of viewing history data, when viewing the user1 data, press the user1 button again to shut down
immediately, it also apply to user 2. If you forget to shut down, the monitor will shut down automatically after 1
minute.
Automatic replacement
：
For each user group, if the stored measurement results exceed 99 groups, the oldest
historical data will be automatically deleted and new measurement data will be recorded.
6.5.2 Memory deletion
Deleting current data:
in memory mode, press the "user 1 button" and "user2 button "for 3 seconds at the same
time. When the LCD shows "del+ current data number" flashing, press the user2 button to confirm deletion.
※
under deletion of current data state, press user1 button can cancel the deletion and shut down the device.
Deleting all records:
under the power off state, press the "user 1 button" and "user2 button "for 3 seconds at the
same time. When the LCD shows "dEL ALL" flashing, press the user2 button to confirm deletion.
※
under deletion of all data state, press user1 button can cancel the deletion and shut down the device.
