YOKOYAMA KP6210, Instruction Manual, Page: 7 / 40

SPOOL PINS
HORIZONTAL SPOOL PIN for normal thread spool
Place thread spool on the pin and secure with a spool cap to ensure smooth
flow of thread. If the thread spool has a thread retaining slit, it should be
placed to the right.
Select the correct spool pin cap according to the type and diameter of the spool.
The spool pin cap should always be larger than the spool itself.
VERTICAL SPOOL PIN for large thread spool
PRESSER FOOT LIFTER
There are three positions for your presser foot.
Lower the presser foot to sew. 1.
Raise the lifter to the middle position to insert or remove fabric, and to
change presser foot.
2.
Lift it to its highest position to insert or to remove thick fabric. 3.
DARNING PLATE
Use the darning plate when you need to control fabric feeding for button
sewing , f ree motion work and free motion darning.
Raise needle and presser foot, and position darning plate onto the needle plate
with the two pins on the back inserted to the holes of needle plate.
Attach the spool pin. Place the felt disc over it. Place a thread spool on the
spool pin.