YOKOYAMA KP6210, Instruction Manual, Page: 25 / 40

ZIGZAG STITCHING
The top thread may appear on the bottom depending on the thread,
fabric , t ype of stitch and sewing speed, but the bobbin thread must
never appear on the top of the fabric.
SETTINGS
Presser foot : General Purpose Foot
Thread tension control: (4)
If bobbin thread is pulling to the top or you are experiencing puckering,
slightly reduce the tension with the Threading tension dial.
ADJUSTING STITCH WIDTH AND LENGTH
Dark grey box indicates the Auto/default value set automatically when
the pattern is selected.
For the Zigzag pattern the stitch length is 2 mm and the stitch width is
5 mm.
The light grey boxes indicates all the possible personal preference
options available to set manually.
SATIN STITCH
This is a closely spaced zig-zag stitch used for applique, bartacking etc.
Slightly loosen the top thread tension and manually adjust the stitch between
0.4 and 2.0 for satin stitching.
Use a backing of stabilizer for lightweight fabrics to avoid puckering.
NOTE: When sewing a dense (closely spaced) Satin Stitch, the Satin
Stitch Foot MUST be used.
PLACEMENT OF PATTERNS
Stitch width of pattern increases from center needle position as illustrated.
J
23