YOKOYAMA KP6210, Instruction Manual

Page: 17 / 40

4
2
1
5
3
7
6
15
C A
B
Low speed High speed
9
8
J
CONTROL BUTTONS FUNCTIONS
1
Start/stop button (If your machine has this function button)
Reverse stitch/Tacking stitch button (2 functions)
2
*When foot controller (pedal) is connected to the machine, the function of this button will be invalid .
Push this button lightly and machine will start to run. Push this button lightly again and the machine will stop to run.
A. When machine has stopped, push this button continually and then the machine will stitch 4 stitches slowly at same
point (that is tacking stitch function) and then machine will automatically stop.
B.
C.
When machine is running, push this button continually and then the machine will stitch 4 stitches slowly at same
point (that is tacking stitch function) and then machine will automatically stop (this function does not apply to
straight stitch).
When machine is running, push this button continually and then machine will reverse slowly and will stitch forward
again while the button is released (THIS FUNCTION IS APPLIED TO straight stitch only).
Needle up needle down button
Needle up needle down button indicator
3
4
Speed adjust button (if your machine has this button equipped)
5
◎
when foot controller is connected to the machine, the sewing speed is controlled by this speed adjust button.
6
LCD Display
Push this button, needle will be down to needle down position. Push this button again, needle will be up to needle
up position. (In normal condition, when machine stop after running, the needle will be stopped at needle up
position).
When needle is in the down position, the indicator will light up. When in up position, the indicator will turn off.