YOKOYAMA KP6210, Instruction Manual, Page: 6 / 40

SETTING UP YOUR MACHINE
Be sure to wipe off any surplus oil from needle plate area
before using your machine for the first time.
POWER LINE CORD/FOOT CONTROL
NOTE: When foot control is disconnected, the machine
will not operate. (Model KP6210A)
Always disconnect the machine from power supply
by removing the plug from the wall-outlet.
POWER/LIGHT SWITCH
Your machine will not operate until the power/light switch
is turned on.The same switch controls both the power and
the light.
When servicing the machine, or changing needle, etc.,
machine must be disconnected from the power supply.
1
2
3
Set power/light switch at "OFF"
Machine socket
Power line cord
Pin plug
Foot control
wall outlet
(1) Connect the power cord and plug as illustrated.
(2) Connect the foot pedal into the machine socket as
illustrated.