6
TI 04R01B01-01EN
Dec. 12, 2011-00
2. Preparation
2.1 Designing the Network
To configure the field wireless network, first determine the network ID, the device tag name of the wireless field
device (YTMX), and the network information for the Ethernet connection of the YFGW.
This document uses the settings shown in Table 3 to configure the network.
Table 3 Network Settings
Item
Settings
Network ID
100
Device Tag (name to identify the device)
YTMX580
Network Settings
Device
IP Address
Subnet Mask
Default Gateway
YFGW
192.168.0.101
255.255.255.0
192.168.0.1
PC1
192.168.0.102
DX or MW100
192.168.0.200
Network Topology
Star
2.2 Installing the Software and Device File
Table 4 shows the software that is required for configuration.
Install the configuration tools, the infrared adapter driver, and Device File on each of the PCs.
For the installation procedure, refer to the instruction manual of the respective software.
Table 4 PC and Software
PC
Software
PC1
• Field Wireless Configurator (included with the YFGW)
• Field Wireless Management Tool (included with the YFGW)
• Device File (CF/DD) R3.02.12 or later
*1
• MW100 Viewer Software (included with the MW100)
PC2
• FieldMate Versatile Device Management Wizard
• Infrared adapter driver
*1: An update patch file for Device File R3.02.12 can be downloaded from the website.
<http://field-wireless.com/>
2.3 Configuring the PC Network
Configure the network settings shown in Table 3 on PC1.
For the network configuration procedures, refer to the instruction manual of the PC.
