background image

i

IM 01B08D02-02EN

4th Edition : Dec. 2019 (YK)

All Rights Reserved, Copyright © 2014 Yokogawa Electric Corporation

Introduction

Thank you for purchasing the YS1000 series single-loop controller (hereinafter referred to as “YS1000”). 

This manual describes how to use YS1310 functions other than communication function. Please read through this 

user’s manual carefully before using the product. 

Note that the manuals for the YS1310 comprise the following five documents: 

●  Printed manual

Manual Name

Manual Number

Description 

YS1310 Operation Guide

IM 01B08D02-01EN This manual describes the basic operation method. 

●  Electronic manuals

Manual Name

Manual Number

Description 

YS1310 Operation Guide

IM 01B08D02-01EN This is identical to the printed manual. 

YS1310 User’s Manual

IM 01B08D02-02EN This manual. It describes the usage of all functions except the 

communication functions. 

YS1000 Series Communication Interface 

User’s Manual

IM 01B08J02-01EN

This manual describes how to use YS1000 in Ethernet, and 

serial communications. For communication wiring, see the 

Operation Guide. 

YSS1000 Setting Software/YS1700 

Programmable Function User’s Manual

IM 01B08K02-02EN

This manual describes how to use YSS1000 and YS1700’s 

programmable function and peer-to-peer communication 

function. 

YS1000 Series Replacement Manual

IM 01B08H02-01EN This manual describes the compatibility of installation and 

wiring with YS100, YS80, EBS, I, EK, HOMAC, and 100 line. 

User’s manuals for YS1000 are available on the following web site: www.yokogawa.com/ns/ys/im/

You need Adobe Reader 7.0 or later (but the latest version is recommended) installed on the computer in order to 

open and read the manuals.

Notice

  The contents of this manual are subject to change without notice as a result of continuing improvements to the 

instrument’s performance and functions. 

  Every effort has been made to ensure accuracy in the preparation of this manual. Should any errors or 

omissions come to your attention, however, please inform YOKOGAWA Electric’s sales office or sales 

representative. 

  Under no circumstances may the contents of this manual, in part or in whole, be transcribed or copied without 

our permission. 

Trademarks 

  Our product names or brand names mentioned in this manual are the trademarks or registered trademarks of 

YOKOGAWA Electric Corporation (hereinafter referred to as YOKOGAWA). 

  Microsoft, MS-DOS, Windows are either registered trademarks or trademarks of Microsoft Corporation in the 

United States and/or other countries.

  Adobe, Acrobat, and Postscript are either registered trademarks or trademarks of Adobe Systems Incorporated.

  Ethernet is a registered trademark of XEROX Corporation.

  We do not use the TM or ® mark to indicate these trademarks or registered trademarks in this user's manual.

  All other product names mentioned in this user's manual are trademarks or registered trademarks of their 

respective companies.

Summary of Contents for YS1000 Series





























































Reviews: