6-30
IM WT310E-17EN
:RECall:NUMber?
Function
Queries the number of blocks of measured data
that is stored.
Syntax
:RECall:NUMber?
Example
:RECALL:NUMBER? -> 600
:RECall[:NORMal]:VALue?
Function
Queries the numeric data at the specified block
number.
Syntax
:RECall[:NORMal]:VALue? {<NRf>}
<NRf> = 1 to 9000 (block number)
Description • Always specify <NRf>. The numeric data at the
specified block number will be returned.
• If you omit <NRf> or specify a number greater
than the number of blocks that contain stored
measured data (the number returned by :
RECall:NUMber?), the entire returned numeric
data will be “NAN” (no data).
• The output items and format are the same as
those of “:NUMeric[:NORMal]:VALue? (when
the item number is not specified).” To set the
output items and format, use the NUMeric
group commands.
:RECall:LIST:VALue?
Function
Queries the numeric list data of harmonic
measurement at the specified block number.
Syntax
:RECall:LIST:VALue? {<NRf>}
<NRf> = 1 to 600 (block number)
Description • This is only valid on models with the harmonic
measurement (/G5) option.
• Always specify <NRf>. The numeric list data at
the specified block number will be returned.
• If you omit <NRf> or specify a number greater
than the number of blocks that contain stored
measured data (the number returned by :
RECall:NUMber?), the entire returned numeric
list data will be “NAN” (no data).
• The output items and format are the same
as those of “:NUMeric:LIST:VALue? (when
the item number is not specified).” To set the
output items and format, use the NUMeric
group commands.
:RECall:PANel
Function
Loads a setup parameter file.
Syntax
:RECall:PANel {<NRf>}
<NRf>
=
1
to
4
(file number)
6.13 RECall Group
The commands in this group deal with outputting stored measured data and loading setup parameters. You can make
the same settings that you can by pressing
SAVE/
LOAD on the front panel and using the LoAd menu. There are no
front panel keys that output measured data that is stored.
