Appendix
App-5
IM 760101-11E
App
11 Size of data block of response data
1 to 308922 bytes
12 List of supported common commands
Refer to Section 5.22 “Common Command Group”.
13 Condition of device when calibration is successfully completed
Same as the one under which measurements are performed
14 Maximum length of block data which can be used for definition of
*DDT
trigger macro
Not supported
15 Maximum length of macro label used in definition of macro, maximum length of block data which can be used for
definition of macro, processing when recursion is used in definition of macro
Macro functions are not supported.
16 Response to
*IDN?
Refer to Section 5.22 “Common Command Group”.
17 Size of storage area for protected user data for
PUD
and
*PUD?
*PUD
and
*PUD?
are not supported.
18 Length of
*RDT
and
*RDT?
resource name
*RDT
and
*RDT?
are not supported.
19 Change in status due to
*RST
,
*LRN?
,
*RCL
and
*SAV
*RST
Refer to Section 5.22 “Common Command Group”.
*LRN?
,
*RCL
,
*SAV
These commands are not supported.
20 Execution range of self-test using the
*TST?
All the memory tests (for each internal memory) given in the Self Test menu displayed
using the MISC can be executed.
21 Structure of extended return status
Refer to Chapter 6.
22 To find out whether each command is performed in parallel or sequentially
Refer to Section 4.5 “Synchronization with the Controller” and to Chapter 5.
23 Description of execution of each command
Refer to Chapter 5 of this manual and to the User’s Manual IM 760101-01E.
Appendix 3 Overview of IEEE 488.2-1987
Summary of Contents for wt1600
Page 1: ...Digital Power Meter Communication Interface IM 760101 11E 4th Edition ...
Page 131: ...7 2 IM 760101 11E 7 2 Sample Program Image ...
Page 138: ...Sample Program 7 9 IM 760101 11E 7 7 4 Output of Normal Measurement Data ...
Page 142: ...Sample Program 7 13 IM 760101 11E 7 7 5 Output of Harmonic Measurement Data ...
