1-6
IM 707281-01E
1.5 Waveform Generation in the AG Mode
Selecting the Output Mode
One shot
Outputs the one-shot waveform of the specified block.
Output
ON
OFF
Output voltage
Continuous oscillation
Continuously outputs the waveform of the specified block.
Output
ON
OFF
Output voltage
One block of waveform
Trigger oscillation
The waveforms set in the Start block to the End block are sequentially output every time
a trigger occurs. When the End block is reached, the waveform pointer returns to the
Start block.
...........
Output
ON
OFF
Output voltage
Trigger signal
Start block
Start block
End block
Repeat
Continuously outputs the waveform in the specified block when a trigger occurs.
Output
ON
OFF
Output voltage
Trigger signal
One block of waveform
Note
• The trigger can be activated by inputting the bus trigger signal* or by clicking the
[ManualTrigger] button on the operation panel.
* A trigger signal that is provided via the WE bus of the measuring station. For details, see the
WE7000 User’s Manual (IM 707001-01E).
• A trigger that occurs while a waveform is being generated is ignored.
• If the output voltage range of a channel is changed while the waveform is being generated,
waveform generation of all channels is temporarily suspended.