manualshive.com logo in svg

YOKOGAWA WE7235, User Manual, Page: 4 / 34

Share
Download
YOKOGAWA WE7235 User Manual Download Page 4

3

IM 707231-01E

How to Use This Manual

Structure of the Manual

This user’s manual consists of the following sections.

Chapter

Title

Description

1

Functions

Explains the system configuration and functions.

2

Hardware Preparation

Explains how to install the module into the measuring
station and how to connect the input.

3

Troubleshooting and

Explains the procedures for troubleshooting, performing

Maintenance

acceleration sensor connection tests and self testing.

4

Specification

Explains the specifications of the module.

Index

Conventions Used in This Manual

• Units

k

Denotes “1000.”  Example: 100 kHz

K

Denotes “1024.”  Example: 720 KB

• Bolded Characters

Characters written in bold mainly refer to on-screen elements and hardware controls.

• Symbols

The following symbols are used in this manual.

A symbol affixed to the instrument.  Indicates danger to personnel

or instrument and the operator must refer to the user’s manual.

The symbol is used in the User’s Manual to indicate the reference.

WARNING

Describes precautions that should be observed to prevent injury or

death to the user.

CAUTION

Describes precautions that should be observed to prevent minor or

moderate injury, or damage to the instrument.

Note

Provides important information for the proper operation of the

instrument.

Summary of Contents for WE7235



































Reviews:

No comments