YOKOGAWA vigilantplant DM8, User Manual

Page: 32 / 63

<3. INSTALLATION, PIPING AND WIRING>
3-7
IM 12T03A01-02E
(1) Panel Mounting
The pipe mounting bracket should be removed from the converter before panel mounting.
Panel cutout dimensions are shown in Figure 3.9.
Before inserting the converter into front of the panel, remove the clumping brackets from both
sides of the converter case. After the case is inserted into a panel, remount the clumping brackets
on the same pace to hold the converter on the panel.
Figure 3.10 illustrates that the converter is mounted on a panel.
212 ±1
275 ±1
Unit: mm
Figure 3.9 Panel Cutout Dimensions Figure 3.10 Panel Mounting
(2) Wall Mounting
Remove the pipe mounting bracket from the converter before wall mounting. Make two holes for
8 mm screws in a wall as illustrated in Figure 3.11.
222
Unit: mm
2-M8 Screws
Figure 3.11 Holes for Wall Mounting Figure 3.12 Wall Mounting
Using two mounting brackets, mount the converter on the wall (see Figure 3.12).
5th Edition : Dec. 11, 2015-00