3 - 1
IM 4H3B1-01E
3. INSTALLATION
3.1 Installation Site/Mounting
Chapter 3 INSTALLATION
This chapter describes the installation of the
µ
R1800, like the installation site, the
mounting and wiring. To install the
µ
R1800 properly, it is necessary to read this
chapter.
3.1 Installation Site/Mounting
3.1.1 Installation Site
The
µ
R1800 installation site should be chosen to meet the following conditions as close
as possible:
Installation site should be panel-mounted only. The
µ
R1800 is especially designed for
panel mounting.
The
µ
R1800 should be placed in a well ventilated area.
The
µ
R1800 will be adversely affected if the unit is exposed to direct sunlight or
installed near a heater. Choose a location near room temperature (23
°
C) with minimal
temperature fluctuations.
To expose the
µ
R1800 to soot, steam, moisture, dust, corrosive gases etc. will adversely
affect it.
To use the
µ
R1800 within strong electro-magnetic fields may cause malfunction. Please
avoid installing near electro-magnetic objects.
To install the
µ
R1800 in a location susceptible to mechanical vibrations will adversely
affect the mechanical parts and the quality of recording. Please choose an installation
site characterized by minimal mechanical vibrations.
This
µ
R1800 must be installed horizontally (however, mounting may be inclined up to
30
°
backwards from vertical).
To use the
µ
R1800 within domestic establishments and within establishments directly
connected to a low voltage power supply network which supplies buildings used for
domestic purposes may cause malfunction of other equipments. Please avoid using in
domestic environment.
