9 - 15
IM 4H3B1-01E
9. CHANGING INITIAL SETTINGS
9.3.2 How to Assign Different Colors to Channels (Dot Model)
You can assign any of the six provided colors to any channel. The initial setting is as
follows:
ch.1, 7, 13, 19 = purple
ch.2, 8, 14, 20 = red
ch.3, 9, 15, 21 = green
ch.4, 10, 16, 22 = blue
ch.5, 11, 17, 23 = brown
ch.6, 12, 18, 24 = black
SETTING PROCEDURE:
Enter the SET UP Mode by turning ‘
ON
’ the power while pressing and holding the
ENT
-key until the SET UP display appears.
Use the
UP/DOWN
-keys to select the display ‘
SETUP=COLOR
’. Press the
ENT
-key.
Select the channel No. for which you want to change a color. Then press the
ENT
-key.
Select the color. Then press the
ENT
-key. The display ‘*
COLOR SET
*’ will appear.
The color setting has been completed, but has not been stored yet. Press the
ENT
-key to
set the color for other channels or press the
ESC
-key to adjust other settings in the SET
UP Mode.
Before leaving the SET UP Mode, you have to store your new settings. Press the
ESC
-
key to return to the ‘
SETUP=COLOR
’ display and then select the ‘
SETUP=END
’
display.
Press the
ENT
-key. Select ‘
END=STORE
’ to keep your new settings or
‘
END=ABORT
’ and press the
ENT
-key. After a few seconds, the Operation Mode will
appear.
9.3 How to Change Initial Settings for Analog Recording
