IM 12D03D02-01E
4-14
4
.
Keypad and Display Functions
(14) Check version number (VEr) panel
Used to check the version number of the program. This is not user configurable.
F/ENT
(15) Defrag memory (dFLG) panel
Up to 300 data can be stored. Unnecessary data can be individually deleted (refer to
Item (1), “Display stored data”), but this individual deletion does not free up memory
occupied by deleted data. Therefore,
may be displayed even though less
than 300 data are stored. In such a case, use the defrag function to consolidate data
and free up the space occupied by deleted data, thereby allowing up to 300 data to be
stored.
While memory defrag is in progress, do NOT turn off the power. In addition, before
starting memory defrag check that there is enough battery life left to avoid battery
shutoff during memory defrag.
• Procedure
Press
F/ENT
key on the flashing “dFLG” display.
will be flashing.
Use
keys to select
, then press
F/ENT
key. While defrag is in progress,
“WAIt” may flash. It may not flash depending on the amount of deleted data. When
defrag is complete, “End” appears.
to toggle
to confirm
F/ENT
to abort
F/ENT
to execute
F/ENT
After a few
seconds
(if only a few data are deleted, you may not see this)