IM 12D03D02-01E
2-3
2
.
Preparation
l
Setting Procedure
After installing the batteries, press and hold
POWER
key for at least one second.
All LCD segments appears momentarily and then the date setting display starts
automatically. Set year, month, day, hours, and minutes following the flowchart below.
Note:
If you attempt to abort the setting procedure before completing, the meter will beep three
times and reject the attempt. Continue until the minute setting is completed.
key for at least 1 sec.
After
pressing
to set
to confirm
to set
to set
to confirm
to confirm
to set
to confirm
Year setting
Day setting
Hour setting (24-hour format)
Month setting
Minute setting
After
several
seconds
After
several
seconds
POWER
F/ENT
F/ENT
F/ENT
F/ENT
to set
to confirm
or
F/ENT
2.4 Setting Temperature Unit
Default temperature units are °C. To change to °F, refer to Sec. 4.3 (13) Set
temperature units (tP.U) panel.
