< 2. Installation, Piping and Wiring >
2-1
IM 12B07N01-01E
2. Installation, Piping and Wiring
2.1
Holder Installation
2.1.1
Installation Site
Install the flow-through type holder in a site where the holder can be easily maintained.
2.1.2
Mounting the Flow-through Type Holder
When strong piping - e.g. process piping - is next to the holder, mount the holder on it as shown
in Figure 2.1.
When a polypropylene holder is used, be careful not to apply excessive force to it.
F2.1E.ai
Outlet
Outlet
Inlet
Inlet
Figure 2.1
Support by Process Piping
If the process piping is not strong enough to mount the holder, use mounting hardware (available
as option) to mount the holder on a vertical (or horizontal) pipe with sufficient strength as
shown in Figure 2.2. The holder can be mounted on a bracket as shown in Figure 2.3 (remove
unnecessary parts from the metal fittings).
F2.2E.ai
Sensor Mounting Nut
Stanchion
Flow-Through
Type Holder
Figure 2.2
Pipe Mounting
