YOKOGAWA IR202 User Manual Download Page 42

Page: 42 / 45

<6. TROUBLE SHOOTING>

6-1

IM 11G02Q02-01EN 2nd Edition : Sep. 04, 2020-00

6. TROUBLE SHOOTING

If the communication is unavailable, check the following items.

• Whether all devices related to communication are turned on.
• Whether connections are correct.

• Whether the number of connected instruments and connection distance are as specified

• Whether communication conditions coincide between the master station (host computer)

and slave stations (instrument)

Transmission speed : 38400bps
Data length : 8 bits
Stop bit : 1 bit
Parity : None
Whether send/receive signal timing conforms to Section 5.6 in this manual.

• Whether the station No. designated as send destination by the master station coincides with

the station No. of the connected instrument.

• Whether more than one instrument connected on the same transmission line shares the

same station No.

• Whether the station No. of instruments is set at other than 0.
If it’s 0, the communication function does not work.

Summary of Contents for IR202














































Search results

Summary of Contents for IR202

Reviews:

Related manuals for IR202

Brands by name

Popular brands

YOKOGAWA IR202, User Manual

Search results

Summary of Contents for IR202

Reviews:

Related manuals for IR202

Brands by name

Popular brands