YOKOGAWA IR202 User Manual Download Page 41

Page: 41 / 45

<5. ADDRESS MAP AND DATA FORMAT>

5-16

IM 11G02Q02-01EN 2nd Edition : Sep. 04, 2020-00

5.3

Supplement to address map

*(1) Register No. 30062 to 30131 (error log)

You can read up to 14 errors in order of most recent to older ones. The following information is

available.

Error No.:

No. of produced error. Stored value is error number minus 1.

Error DAY:

Date

Error HOUR: Indicates at what o’clock error occurred.

Error MIN:

Indicates at what minutes error occurred.

Error TARGET: No. of Ch where error occurred.

Ch No. minus 1 is stored.

0 at error No. 3 or 10.

* (2) Register numbers 30181, 30182, 30183 (Display information (1), (2), (3))

Display information shows a current status of the instrument.

• The next values on the display information (1) represent the following setting status.

Measurement mode (manual calibration display included)

Menu mode

Changeover of range

Calibration setting

Alarm setting

Automatic calibration setting

Peak alarm setting

Parameter setting

Maintenance mode

Factory mode

10:

Auto zero calibration setting

• The next values on display information (2) represent the following status at manual

calibration.

Measurement mode

Channel selection at manual zero calibration

Zero calibration wait at manual zero calibration

Zero calibration in progress at manual zero calibration

Channel selection at manual span calibration

Span calibration wait at manual span calibration

Span calibration in progress at manual span calibration

10:

Error contents indication

•

Contents of values of display information (3)

Correspond to value of Ch (channel) from which the measurement mode is displayed.

Top channel number minus 1 is stored.

* (3) Register number 30189 (manual calibration channel)

Data for knowing a channel (component) which the cursor is positioned at to carry out a

calibration at when a manual calibration is under way.

Channel number to carry out a calibration at minus 1 is stored.

Summary of Contents for IR202














































Search results

Summary of Contents for IR202

Reviews:

Related manuals for IR202

Brands by name

Popular brands

YOKOGAWA IR202, User Manual

Search results

Summary of Contents for IR202

Reviews:

Related manuals for IR202

Brands by name

Popular brands