background image

IM 12B07K02-01E

 

 

< 1. Specification >

1-1

1.  Specification

The Model FU20 offers a simple and cost effective solution for a wide variety of waste water and 

process applications. This all-in-one sensor provides simultaneous measurement of pH, ORP 

and temperature. The rugged Ryton body is designed for easy installation into on-line via the 3/4 

inch tapered threaded connections provided on both ends of the sensor.

1.1 

Standard Specifications

Measuring range: 

pH; 2 to 12   ORP; -1500 to 1500 mV

Solution temperature :  -5 to 105°C (sensor only, sample is not freezed)
Solution pressure :  

0 to 1 MPa (sensor only)

Solution conductivity :  50 µS/cm or higher
Solution flow velocity :  2 m/s max.
Internal electrolyte: 

Saturated KCl (Non refillable)

Temperature sensor :  Pt1000 (Note)

Body materials:  

Ryton (PPS 40GF)

Weight:  

 

Approx. 0.5 kg (Body)

Storage temperature:  -10 to 50 °C

Applicable Liquid Analyzer/converter:   FLXA202/FLXA21 2-Wire Liquid Analyze,  

FLXA402 4-Wire Converter, PH450G pH/ORP converter

Applicable holder:  

 Special order for PH8HG, HH350G with optional adapter, cannot be 

used with HH350G/-JT.

Note:  The temperature sensor included in the FU20 is intended to provide indication and cell compensation. The construction has not 

been tested to the pressure vessel standards required for plant temperature control.

NOTE

Cautions for using the FU20 sensor

Note that the FU20 sensor has limited life which depending on installation process.
Be careful not to allow liquid junction and glass of the pH sensor to dry out.
When storing the sensor, be sure to attach the protective cap (supplied with it on shipment) to its tip.
The sensing glass membrane of the pH sensor gradually deteriorates during storage.
A virgin pH sensor may become unusable because of its deterioration. Avoid storing the sensor 

for a long time (Use within a year is recommended).

1.2 

Model and Suffix codes

Model

Suffix Code

Option Code

Description

FU20

................................... ...................

Wide body Sensor

Type

-05

-10

...................

...................

Fixed cable 5 meter

Fixed cable 10 meter

Temperature element

-T1

................... Pt1000

Model

-NPT

................... Dome shape model

Note:  Special order is needed for using with PH8HG drop-in guide pipe.

4th Edition : Nov.20,2018-00

Summary of Contents for FU20
















Reviews: