<7. Operation>
7-4
IM 01C27F01-01EN
2) Creating a provisioning information file
The following provisioned information is stored
in the provisioning information file.
• Network ID
• Device tag
• EUI64
• Join key
• Provisioner (name of the user who performed
provisioning work by FieldMate)
• Date (Time and date when provisioning was
performed by FieldMate)
This provisioning information file is required to
load from the Field Wireless Configurator to the
Field Wireless Integrated Gateway. Store the
file carefully.
■ Connecting to a field wireless network
The action after installing the battery pack or turning
on the power varies depending on the silence
setting.
Mounting the battery pack or turning on the power
automatically starts a search for the field wireless
network. When the Field Wireless Integrated
Gateway is found, the instrument enters the join
status.
When the Field Wireless Integrated Gateway is not
found and a specified time has elapsed, a cycle of a
one-hour pause and six-minutes search is repeated
until the instrument can join the field wireless
network.
For details on the procedure to switch to silence
mode, refer to subsection 8.3.13 “Switching to
Silence Mode.”
F0704.ai
Mounting battery pack or turning on the power
Boot
Infrared communication
Pause (b)
Search failure for
the specified time
Infrared
communication
1 hour
passed
Search failure
for 6 minutes
Ready 2:
Searching (b)
(Connect)
(Connect)
Confirm connecting
status: Join (c)
(Publish)
Operation (d)
Deep sleep
setting
(Disconnect)
(Disconnect)
Ready 1:
Searching (b)
Deep sleep (a)
Infrared
communication
Figure 7.4
Wireless Connection Process
(a) Deep sleep
F0705.ai
(b) Ready and pause
F0706.ai
(c) Confirm connecting status
F0707.ai
(d) Join
F0708.ai
