<3. Component Names>
3-1
IM 01C27F01-01EN
3. Component Names
● Terminal configuration
(External powered type)
Ground terminal
Power supply
te
Power supply
terminal
–
F0301.ai
YES
(Note 2)
(Write disabled)
NO
(Write enabled)
Zero-adjustment
screw
Ground terminal
RF assembly
CPU assembly
Transmitter
section
Amplifier Cover
Mounting
screw
Integral
indicator
Hardware write protection switch (WR)
Write Protection
Write Protection
Switch Position
(Note 1)
Pressure-detector
section
Slide
switch
E WR
D
Not in use
Write protection switch
H
L
E
D
H
L
E
D
Antenna
Note 1: Set the switch as shown in the figure above to set the write protection. The hardware write protection switch is set to E side. Set
to H side for the switch of not-in-use.
Note 2: When the switch is D side (write protection setting), provisioning is acceptable. For details of provisioning, refer to section 7.4
“Connecting to the Field Wireless Network”.
Figure 3.1
Component Names
Table 3.1
Display Symbol
Display Symbol
Meaning of Display Symbol
▲
The output signal being zero-adjusted is increasing.
▼
The output signal being zero-adjusted is decreasing.
Write protect function is enabled.
