＜
Toc
＞
＜
Ind
＞
24
All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation
TI 04L01A01-02E
2.4
Recording Section
Because the conventional chart paper has been replaced by electronic storage, various recording (file)
formats and recording modes are available.
2.4.1
Removable storage media
You can select from the following removable storage media when you place the order.
3.5 inches floppy disk (1.44 MB: 2HD)
PCMCIA flash ATA memory card (Up to 160 MB)
Zip disk (100 MB)
2.4.2
File Types
File types
The following types of data can be stored on the removable storage meda.
File Type
Data description
Format
Display data
The maximum and minimum values within the waveform update rate
of the measured data that have been sampled
Measurement
data file
Event data
Instantaneous value of the data sampled at the specified sampling rate
Binary
Manual sampling Data file
Instantaneous value at the time of the key input or contact input.(It
saves one set of instantaneous channel values to a ASCII file. Up to
50 sets of values can be saved in the file.)
ASCII
Statistical computation (TLOG) data file*1
Data at the time of TLOG time expiration
Binary
Report file*1
Hourly, Daily, Weekly, Monthly
ASCII
Setup file
Switching between SET mode and SETUP mode
ASCII
Alarm/message
Saved within the measurement data file
Binary
Setup information
Stored within the measurement data file
Binary
Login user name
When the login function is turned ON, the user name of the person
that executed the start/stop operation and entered messages is
recorded within the measured data file.
Binary
Information
Batch information*2
Stores batch information within the measurement data file.
Binary
*1: When the computation option is installed.
*2: When the batch function option is installed.
The snapshot data file of the screen is output to the external recording medium or via
communications.
File type
Data description
Output
Format
Snapshot file
Image obtained by screen shot
Output to removable storage meda or via communications
PNG
File name
The file name of the data is in the form [the time of the first sampled data + serial number.extension.
A folder can be created on the removable storage medium and the following data files can be stored.
Folder name
: Up to eight alphanumeric characters
Display data file
: Mddhhmma.DDS
Event file
: Mddhhmma.DEV
Report file
: Hourly: Mddhhmma.DHR
Daily: Mddhhmma.DDR
Weekly: Mddhhmma.DWR
Monthly: Mddhhmma.DMR
Manual sampling
: Mddhhmma.DMN
TLOG file
: Mddhhmma.DTG
M
: Month (1 to 9,X,Y,Z)
* X = Oct., Y = Nov., Z = Dec.
dd
: Day
hh
: Hour
mm
: Minute
a
: Serial number (0 to 9,A to Z)
Setup file name
The name of the setup file is specified using up to eight alphanumeric characters.
Setup file
: xxxxxxxx.PNL (xxxxxxxx: eight or less alphanumeric characters)
