12
IM CL250
4. Battery Replacement
WARNING
To avoid electric shock hazard, make sure to set the Function Selector
switch to "OFF" and remove the test leads from the instrument before trying
to replace batteries.
CAUTION
●Do not mix new and old batteries.
● Make sure to install batteries in correct polarity as indicated in battery
compartment.
If the instrument is powered on, but the display blanks or "
" is shown on
the lower left corner of the display, replace the batteries.
Note that when the battery is completely exhausted, the display blanks
without "
" shown.
(1)Set the Function Selector switch to the "OFF" position.
(2) Unscrew and remove the battery compartment cover on the bottom of the
instrument.
(3) Replace the batteries observing correct polarity. Make sure to use two new
R6P batteries.
(4)Replace and screw the battery compartment cover.
